Card Readers & Keypads

Here you can edit the background of the section
AK-11 EXTERIOR DIGITAL KEYPAD

MODEL 466LM WIRELESS COMMERCIAL KEYPAD – 390MHZ

Ideal for apartments or controlled access applications. Keypad provides 100,000 available code combinations for optimum security and convenience.

More Information

- Ideal for apartments or controlled access applications

- Keypad provides 100,000 available code combinations for optimum security and convenience

- Key mounts to a gooseneck post (optional) or direct to a wall

- Illuminated stainless steel faceplate and keypad

- Rugged tamper-resistant case and “low battery” indicator

- 6V alkaline battery provides up to 5 years of reliable service

- Requires the addition of a LiftMaster® Radio Receiver (412HM recommended)

EMX Model PRX-320 Proximity Reader

EMX MODELl PRX-320 PROXIMITY READER

EMX’s new stand alone proximity reader is appropriate for use on gates or doors where there is a need for resistance to climatic conditions.

More Information

EMX’s new stand alone proximity reader is appropriate for use on gates or doors where there is need for resistance to climactic conditions.

Benefits Include:

- Supports up to 2000 users

- Low energy consumption. Can be used on solar installations

- Option of using a built-in contact for doorbell enunciators

- Use it as a keypad for some users and as a proximity card reader for others


Standard Features

- Programmable door lock settings

- Up to 2000 users by card or 8 user passwords

- Power Requirements: 12 VDC 500-800 mA

- Power Consumption: 90 mA standby / 110 mA activated

- Read Range: 5 inches

EMX Model DTM-9 Seven Day Timer

EMX MODEL DTM-9 SEVEN DAY TIMER

The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times.

More Information

The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times.
The DTM-9 will keep your overhead doors, gates and parking barriers continuously open during rush hours. This will increase comfort and save on entry and exit times for your employees and customers.

The DTM-9 will allow you to program the lock out times for your doors with magnetic locks and electric strikes.

Benefits Include:
- Easy operation
- Reliability
- Flexible programming

Standard Features
- Large display and control push-buttons.
- Back-up rechargeable battery for power outages or brown outs. The power input is protected by MOV and fuse.
- Program up to six different events per week. The timer can also program each day individually or a block of days.
- Has wide power supply options and can be ordered in 12V DC, 24V AC or DC, 120V AC and 240V AC.
- Manual override for ON or OFF operation.

AWID PROXIMITY SR-2400 CARD READER

AWID PROXIMITY SR-2400 CARD READER

Wiegand Interface Compact Reader. Excellent value & performance.

More Information

Mullion Mount
- Wiegand Interface Compact Reader
- 4" to 5.5" (10 to 13cm) read range
- 4.5" x 1.8" x 0.7" (11.4 x 4.5 x 1.8cm) in size
- Power requirement: 5 to 12 VDC
- Excellent value & performance
- Credentials (Cards/Tags)

AWID PROXIMITY CS-AWID CARDS

AWID PROXIMITY CS-AWID CARDS

Customizable with your logo on the front

More Information

- Clam Shell Card
- Credit Card Size with Beveled Edges
- Molded Slot in Portrait Orientation
- Off White Colo

- Reading Distance of 4 to 24 inches (depending on Reader)
- Dimensions: 3.375 x 2.125 x 0.075 in

 

hid-card-reader-lpic

HID PROXIMITY CARD READER

Proximity Card Readers provide a simple, elegant, and robust means of access control in virtually any application.

More Information

Proximity Card Readers provide a simple, elegant, and robust means of access control in virtually any application. Stand-alone readers can be used to control access to gates, doors, lockers and more. Proximity readers are available as integrated components of many of our keypad models. These HID readers are compatible with any 26-bit Wiegand proximity (prox) cards, or keyfobs with integrated prox.

 

AP-5 WIRELESS ACCESS CONROLLER

AP-5: WIRELESS ACCESS CONTROLLER – TWO GATE OR DOORS

Designed for a broad range of applications and can control one or two door strikes, mag-locks, barrier gates, automatic gates, or door operators. Its wireless design and small size fits a variety of access control requirements.

More Information

The AP-5 Wireless Access Controller – Two Gate or Doors is designed for a broad range of applications and can control one or two door strikes, mag-locks, barrier gates, automatic gates, or door operators. Its wireless design and small size fits a variety of access control requirements.

The unit’s built-in high-gain superheterodyne receiver picks up transmitter signals from up to 500 feet away. The optional EXA-2000 antenna can be used for additional range. Up to 480 Linear MegaCode® transmitters and six Model MGT supervised safety edge transmitters can be programmed into the AP-5’s memory. Up to 238 entry codes can be programmed for activation by one or more MegaCode® wireless keypads. The AP-5 will retain its memory, even without power.

Three dry contact relay outputs are provided. One relay is dedicated for access control, another dedicated for obstacle detection, and the third programmable for either access or obstacle. Access relays can be set for timed or latch-on/latch-off toggle operation. The on or off toggle state of a relay is maintained even after power interruption. For entrapment detection, obstacle relays activate from MGT safety edge transmitters and connect to the obstacle input of the access device. OPEN REQUEST input terminals are supplied for hardwired activation of the access devices with an external pushbutton or keyswitch.


The AP-5 monitors each MGT safety edge transmitter for hourly status reports, tamper signals, and low battery signals. A beep will sound every 5 seconds if a fault occurs and the trouble source can be displayed. An access transmitter must be activated twice to trigger the access relay if a supervisory trouble condition exists on any MGT transmitter.

The AP-5 can be powered from 12-24 Volts AC or DC. The Form C relay outputs can switch up to 1 Amp each. An EARTH GROUND terminal is provided as a recommended connection for maximum lightning and static protection.


Features
- Ideal for gated communities, parking facilities, and industrial sites
- Easy to set-up and use, up to 480 remotes can be programmed with a few keystrokes
- Easy to add, suspend, and delete transmitters through programming mode, no transmitter dip switches to set
- Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
- Supports up to six fully supervised safety edge transmitters
- AP-5 replaces Linear’s AP-4; AP-5 available for replacement of existing AP-4 units only
- RF frequency: 318 MHz
- 4.45″ W x 5.75″ H x 1.5″ D (without antenna)

DoorKing Model 1520 1524 Stand Alone Card Readers

DoorKing Model 1520 1524 Stand Alone Card Readers

Provides users with a full-feature single-door stand-alone access control system.

More Information

The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader (DK Prox, AWID or HID) or can be ordered as a single door controller allowing the user to add their own 26-bit access control device.


The 1524 is available only with a DK Prox card reader. Give Edwards Ornamental a call for more information about this and other DKS products.

Features Model 1520
- Built-in proximity card reader (available with DK Prox, AWID or HID reader)
- Available as a controller only (add your own 26-bit wiegand device)
- Built-in programming keypad
- Indoor or outdoor use

Features Model 1524
- Built-in DK Prox card reader
- Program with a hand held programmer or with programming cards
- Available as a mullion mount or with an outdoor enclosure
- Indoor or outdoor use

Specifications Model 1520
- Stores up to 1000 card codes
- Transaction buffer stores last 3600 events
- Timed anti-pass back (1-59 minutes)
- Four time zones
- Clock and transaction buffer maintain data for up to 3 days in the event of a power outage
- Print Menu.
- Real time print mode.
- Form “C” dry contact relay
- 16 VAC, 20 VA power transformer supplied.

Specifications Model 1524
- Stores up to 1000 card codes
- Form “C” dry contact relay
- 12 VDC power supply included

Here you can edit the background of the section